Today we’re dotting our i’s and crossing our t’s for an order of grey solar panels, custom-made for a solar façade in Belgium. That sounds a little mysterious, we kow, but we’re not allowed to share much more about this project just yet. What we can say is that our colored solar panels, ColorBlast, are a part of a larger, striking design!
We can also tease that the building already has a sustainable energy function and that we have the opportunity to reinforce this with our colored PV modules in an aesthetically responsible manner!
For this order of grey-colored solar modules we enforced similar extra quality controls as we do with most colored solar façades. One of the first tests is a visual check of the glass and, after production, we perform the same check on the end-product. This visual control is done twice for 100% of our manufactured modules, after all, who wants stripes, stains or misprints on their façade?
After the visual check of the glass we perform a color measurement. Measuring the color of a colored solar panels is incredibly important for solar façades and rooftops because it is the only reliable way to test whetehr an order contain color differences. You don’t want to end up with a checkered effect on your façade unless that was your design in the first place! Measuring 100% of the modules is therefore a must as it ensures the entire order falls within the agreed upon color tolerance. Color tests are performed on the front glass and the PV module after lamination.
At Kameleon Solar, we maintain a maximum color deviation that is almost, if not entirely, invisible to the human eye (this is dependent on the person, some people have can differentiate colors far more accurately than the average individual).
After the color measurement we perform an EL (electroluminescence) test, where we photograph with the colored solar panel that is electrically charged by a battery with a special camera. This camera, in which the infrared filter has been removed, allows us to see the electrical current in the PV module. It looks a lot like an x-ray and, similarly, allows us to see whether the internal components meet our strict quality requirements. We love safety, so this test, too, is performed on 100% of our modules!
Next to these quality tests, we also perform all the customary tests for PV modules in-line.
The color code that was chosen for this order was KSB E1065 (our color library for ColorBlast colored solar panels is available to download here). What was unique about this color is that the pattern was slightly larger than we usually apply. As a result, we unexepectedly needed to re-calibrate some of our measurement devices to ensure our quality controls remained accurate. It’s not as simple as it seems, manufacturing colored solar panels, so always be sure to check which quality controls your manufacturer is implementing.